基于有机羧酸配体的Co(Ⅲ)/Cu(Ⅱ)配合物的合成、结构及表征

在溶剂热条件下,以含卤素有机羧酸3-溴-吡啶-2,6-二甲酸(H₂L)为配体,以硝酸钴、硝酸铜为金属源,合成了两例配合物:[Co(L′)₃](1)和[Cu(L′)₂]_n(2)(HL′=5-溴-吡啶-2-甲酸),通过元素分析(EA)、X射线单晶衍射(SXRD)、X射线粉末衍射(PXRD)、红外光谱(IR)和热重分析(TGA)进行结构表征。X射线单晶衍射结果表明,配体H₂L在反应过程中发生脱羧现象,生成单羧酸配体5-溴-吡啶-2-甲酸。在配合物1中,每个Co(Ⅲ)都位于略微扭曲的八面体几何构型中,不对称单元中含有两个单核单元,单核单元通过C—H…O氢键形成三维超分子结构。配合物2的不对称单元中含有一个Cu(Ⅱ),两个脱质子的L′^-配体,每个Cu(Ⅱ)都是六配位的,位于扭曲的八面体几何构型中。Cu(Ⅱ)由配体连接生成1D链结构,通过C—H…O氢键形成三维超分子结构。此外,研究了两例配合物的热稳定性能。     

晶格畸变检测仪研究碳化硅晶片中位错缺陷分布

利用晶格畸变检测仪研究了SiC晶片位错分布情况,通过对熔融KOH腐蚀后的SiC晶片进行全片或局部扫描,从而得到完整SiC晶片或局部区域的位错分布。与LEXT OLS4000 3D激光共聚焦显微镜扫描腐蚀图进行比较,晶格畸变检测仪扫描腐蚀图可以将晶片上位错腐蚀坑信息完全呈现出来,且根据腐蚀坑呈现的颜色及尺寸大小,可以分辨出三种不同类型的穿透型位错,其中黑点腐蚀坑对应螺位错,小尺寸白点腐蚀坑对应刃位错,大尺寸白点腐蚀坑对应混合型位错。采用晶格畸变测试仪研究了4英寸(101.6 mm)N型4H-SiC晶体不同生长时期的位错密度及分布情况,结果表明随着晶体生长,位错密度呈现逐渐降低的趋势,生长后期晶片的总位错密度降为生长前期晶片总位错密度的近1/3,有利于反馈位错缺陷在SiC晶体生长过程中的延伸和转化特性信息,以指导SiC晶体生长工艺改进。     

片段化森林中檵木幼苗种内叶经济性状变异及其驱动因子

在异质性生境中，种内功能性状变异有助于植物对环境的适应，进而影响种群更新、群落构建和生态系统过程。探讨了种内叶经济性状的变异及受生境异质性的塑造情况。以千岛湖片段化生境中的常见种檵木（Loropetalum chinense）的幼苗为研究对象，测定了200株檵木幼苗个体水平的7个叶经济性状（比叶面积SLA、叶全碳量C、叶全氮量N等）及其对应的生境因子（郁闭度、土壤全碳量、土壤全氮量等），采用相关性检验、主成分分析和线性混合效应模型等方法探讨片段化森林中檵木幼苗的种内叶经济性状变异及生境异质性对该变异的驱动作用。结果显示：（1） 在7个叶经济性状所构成的21对相关性分析中，有12对显著相关。经主成分分析降维后，主成分1（PC1）占性状总变异的43.02%，主要与比叶面积、叶绿素浓度、叶全氮量呈正相关，与叶干物质质量分数和叶碳氮比呈负相关，体现了檵木的种内叶经济谱，可反映叶片的最大光合效率。（2）片段化对生境条件和叶经济性状均有影响。岛屿森林群落的郁闭度显著低于大陆。相对于大陆，岛屿中的檵木幼苗趋向于更小的PC1值（缓慢投资-收益策略）；大岛边缘较大岛内部偏向于更小的PC1值。（3）生境因子中，郁闭度对PC1具有显著正效应。研究表明，片段化生境中的檵木在幼苗阶段存在叶经济谱，生境片段化可通过影响生境条件进而改变檵木幼苗的叶经济性状。随着生境片段化程度的加剧，檵木幼苗的叶经济性状逐渐向缓慢投资-收益策略靠拢。     

细胞松弛素B阻断微核法鉴定男性个体辐射敏感性的方法初探

初步研究了男性个体辐射敏感性的鉴定方法及标准。采集50名男性志愿者的外周血，分别给予不同剂量X射线照射，采用细胞松弛素B阻断双核法测定微核率(MNF)，通过二阶多项拟合法，绘制微核剂量效应选项中心标准曲线，将个人微核剂量效应曲线与标准曲线比对后判断个体辐射敏感性。 $0.0\sim2.5 $ Gy剂量范围内，剂量效应二阶多项拟合的中心方程为(MNF=0.014 7+0.036 2D+0.023 1D 2， r=0.726)。50名志愿者中，辐射敏感的有13人，辐射抗性的有14人，基本符合正态分布。Spearman秩和相关分析结果显示，MNF在各个辐射剂量点与辐射敏感性均存在正相关,与辐射抗性呈负相关,MNF随剂量增加而增加。本研究初步建立了“以线代点”男性个体辐射敏感性鉴定方法,并发现男性外周血淋巴细胞的本底微核率与个体辐射敏感性呈正相关。     

基于关联规则和技术功效矩阵的企业技术创新机会发现和辅助决策方法

为助力科技型创新企业准确且快速地从外部捕获创新技术机会, 提出一种企业技术机会发现和辅助决策方法. 首先, 挖掘领域内的技术热点、技术重点和有潜力的技术作为领域技术创新机会. 然后, 通过关联规则分析领域技术机会和企业已有技术之间的相关性, 进一步结合技术掌握度和新颖度, 识别更适合企业的技术创新机会. 最后, 创新性地采用Sen-BERT语言模型和K-means聚类方法构建技术功效矩阵, 辅助企业从功能需求的角度进行技术创新决策. 以电动汽车领域为例验证了该方法的可行性.     

铟镓共掺杂对n-ZnO纳米棒/p-GaN异质结生长行为和光电性能的影响

利用低温水热法在p-GaN薄膜上生长了铟(In)和镓(Ga)共掺杂的ZnO纳米棒。X射线衍射(XRD)、X射线光电子能谱(XPS)和X射线能量色谱仪(EDS)结果表明,In和Ga已固溶到ZnO晶格中。扫描电子显微镜(SEM)结果表明, ZnO纳米棒具有良好的c轴取向性,随着In和Ga共掺杂浓度的增加,纳米棒的直径减小,密度增加。XRD结果表明,In和Ga共掺杂引起ZnO晶格常数增大,导致(002)衍射峰向低角度方向偏移。同时,ZnO的光学性质受到In和Ga共掺杂的影响。与纯ZnO相比, 共掺杂ZnO纳米棒的紫外发射峰都出现轻微红移,这是表面共振和带隙重整效应综合作用的结果。I-V特性曲线表明,随着In和Ga共掺杂浓度的增加,n-ZnO纳米棒/p-GaN异质结具有更好的导电性。     

Preparation and characterization of ultrasensitive and specific polyclonal antiserum against ciprofloxacin based on cationized bovine serum albumin

An ultrasensitive polyclonal antiserum against ciprofloxacin (CPFX) was developed by introducing cationized bovine serum albumin (BSA) as the carrier. Conjugates used as immunogens were synthesized using CPFX coupled to BSA cationized with ethylenediamine and hexamethylenediamine, namely CPFX-eBSA and CPFX-hBSA. The results showed that the antisera immunized with CPFX-hBSA exhibit an improved sensitivity and specificity compared with those immunized with CPFX-eBSA. Under the conditions of optimal heterologous enzyme-linked immunosorbent assay, the optimal antiserum yielded an IC₅₀ of 0.097 ng mL^?1, which proves it to be more sensitive than any CPFX antibody. Cross-reactivities with norfloxacin, enrofloxacin, and ofloxacin were < 3.0 %. No cross-reactivities with penicillin and gentamicin were found. The limit of detection was 0.01 ng mL^?1, which is far below the maximum residue level established by the EU regulation, suggesting the great potential of the presented antiserum for quantitative assays of CPFX in samples.     

Fully C/N‐Polynitro‐Functionalized 2,2′‐Biimidazole Derivatives as Nitrogen‐ and Oxygen‐Rich Energetic Salts

Through the use of a fully C/N‐functionalized imidazole‐based anion, it was possible to prepare nitrogen‐ and oxygen‐rich energetic salts. When N,N‐dinitramino imidazole was paired with nitrogen‐rich bases, versatile ionic derivatives were prepared and fully characterized by IR, and ¹H, and ¹³C NMR spectroscopy and elemental analysis. Both experimental and theoretical evaluations show promising properties for these energetic compounds, such as high density, positive heats of formation, good oxygen balance, and acceptable stabilities. The energetic salts exhibit promising energetic performance comparable to the benchmark explosive RDX (1,3,5‐trinitrotriazacyclohexane).     

TBAI‐Catalyzed/Water‐Assisted Double C−S Bond Formations: An Efficient Approach to Sulfides through Metal‐Free Three‐Component Reactions

An aqueous catalytic method for double C?S bond formations that involves alcohol derivatives, organic halides, and sodium thiosulfate has been developed. A diverse range of functionalized sulfides, including pharmaceutical and biological derivatives, can be obtained in an efficient and eco‐friendly manner under air. The mechanistic studies revealed that this tetrabutylammonium‐iodide‐catalyzed/water‐assisted reaction generated a mercaptan species as the key intermediate.     

Molecular structure and properties of click hydrogels with controlled dangling end defect

In this study, controlled amount of dangling ends is introduced to the two series of poly(ethylene glycol)‐based hydrogel networks with three and four crosslinking functionality by using click chemistry. The structure of the gels with regulated defect percentage is confirmed by comparing the results of low‐field NMR characterization and Monte Carlo simulation. The mechanical properties of these gels were characterized by tensile stress–strain behaviors of the gels, and the results are analyzed by Gent model and Mooney–Rivlin model. The shear modulus of the swollen gels is found to be dependent on the functionality of the network, and decreases with the defect percentage. Furthermore, the value of shear modulus well obeys the Phantom model for all the gels with varied percentage of the defects. The maximum extension ratio, obtained from the fitting of Gent model, is also found to be dependent on the functionality of the network, and does not change with the defect percentage, except at very high defect percentage. The value of the maximum extension ratio is between that predicted from Phantom model and the Affine model. This indicates that at the large deformation, the fluctuation of the crosslinking points is suppressed for some extend but still exists. Polymer volume fractions at various defect percentages obtained from prediction of Flory–Rehner model are found to be in well agreement with the swelling experiment. All these results indicate that click chemistry is a powerful method to regulate the network structure and mechanical properties of the gels. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1227–1236